Acnodes FES 2217 Manuale Utente Pagina 1

14628 Central Ave,Chino, CA 91710tel:909.597.7588, fax:909.597.1939© Copyright 2013 Acnodes, Inc.All rights reserved. Product description and product

1-5 Front & Rear panel Front Panel Rear Panel

2-1 Front panel Pin Definition1. Power On/ Off Button2. Power Reset Button3. Power & HDD LED2-2 Rear Panel Pin DefinitionChapter 2: Pin Definition

2, 10, & 11: COM Port 1, 2, 3 (DB-9): RS-232/ 422/ 485PINRS-232RS-422RS-4851DCD#TX+RTX+2RXDRX+Not Used3TXDTX-RTX-4DTR#RX-Not Used5GNDGNDGND6DSR#No

2-3 Internal Pin Definition & Jumper Settings2-3.1 Main Board Top View

2-3.2 Main Board Pin Definition

2-3.3Jumper Settings1. Clear CMONS Jumper (CLRCMOS1) [refer to P.14, No. 26]It allows you to clear the data in CMONS. To clear and reset the system pa

4. Panel Power Jumper (3-pin PNL_PWR1) [refer to P.14, No.8]5. ATX/ AX Mode Jumper (3-pin PWR_JP1) [refer to P.14, No. 22]6. Digital Input/ Output Pow

9. USB 2.0 Headers (9-pin USB4_5) [refer to P.14, No. 24]Besides four default USB 2.0 ports on the I/O panel, there are three USB 2.0 headers on thism

11. System Panel Header (9-pin PANEL1) [refer to P. 14, No. 21]This header accommodates several system front panel functions.- PWRBTN (Power Switch)-

14. COM Port Headers (10-pin COM4) [refer to P. 14, No. 37](10-pin COM5) [refer to P. 14, No. 38](10-pin COM6) [refer to P. 14, No. 39]These COM heade

CopyrightThis publication contains information that is protected by copyright. No part of it may be reproduced inany form or by any means or used to m

17. SATA Power Connectors (4-pin JPWR1) [refer to P.14, No. 23](4-pin JPWR2) [refer to P.14, No. 20]18. Digital I/O Header (10-pin JGPIO1) [refer to P

Chapter 3: UEFI Setup Utility3-1 IntroductionThis section explains how to use the UEFI SETUP UTILITY to configure yours system. The UEFI chip on themo

3-2 Main ScreenWhen you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview.

3-3 Advanced ScreenIn this section, you may set the configurations for the following items: CPU Configuration, Chipset Configuration,Storage Configura

3-3.1 CPU ConfigurationIntel Hyper Threading TechnologyTo enable this feature, it requires a computer system with an Intel processor that supports Hyp

3-3.2 Chipset ConfigurationSet Panel Type byUse this to configure Set Panel Type.The Default value is [UEFI Setup].Panel Type SelectionUse this to sel

3-3.3 Storage ConfigurationOnboard SATAII ModeThis item is for SATAII_1 and SATAII_2 ports. Use this to select SATA mode. Configuration options:[IDE M

3-3.4 Super IO ConfigurationCOM 1 ConfigurationUse this to set parameters of COM1.COM 2 ConfigurationUse this to set parameters of COM2.COM 3 Configur

3-3.5 ACPI ConfigurationSuspend to RAMUse this item to select whether to auto-detect or disable the Suspend-to-RAM feature. Select [Auto]will enable t

3-3.6 USB ConfigurationUSB 2.0 ControllerUse this item to enable or disable the use of USB 2.0 controller.Legacy USB SupportUse this option to select

14628 Central Ave,Chino, CA 91710tel:909.597.7588, fax:909.597.1939© Copyright 2013 Acnodes, Inc.All rights reserved. Product description and product

3-4 Hardware Health Event Monitoring ScreenIn this section, it allows you to monitor the status of the hardware on your system, including theparameter

3-5 Boot ScreenIn this section, it will display the available devices on your system for you to configure the boot settings andthe boot priority.Setup

3-6 Security ScreenIn this section, you may set, change or clear the supervisor/ user password for the system.

3-7 Exit ScreenSave Changes and ExitWhen you select this optino, it will pop-out the following message, “Save configuration changes andexit setup?” Se

14628 Central Ave,Chino, CA 91710tel:909.597.7588, fax:909.597.1939© Copyright 2013 Acnodes, Inc.All rights reserved. Product description and pr

14628 Central Ave,Chino, CA 91710tel:909.597.7588, fax:909.597.1939© Copyright 2013 Acnodes, Inc.All rights reserved. Product description and product

1-2 Product SpecificationProcessor Support Atom Dual-core D525 1.86 GHz low power Processor 512KB L2 Cache, supports 64 bit, HT, XD technology Buil

Rear Panel Optional I/O 3 DB-9 for COM 4, 5, 6 RS-232 port or 2 COM + 1 Digital I/O 1 DB-25 for Printer portPower Supply DC 12V or 24V input. 12VFC

1-3 System Block DiagramFES2217

1-4 Mechanical DiagramsFES 2217